Dirty Electricity

A Guide to Dirty Electricity

Dirty electricity. What do you think of when you imagine this? Maybe a live wire that has fallen in the mud? It’s more serious than you would think. In this post, we will look at what dirty electricity is, why it may be harmful to you, and what you can do about it. Without further ado, let’s get started, shall we?

What is Dirty Electricity

Dirty electricity, also known as electrical pollution in some circles, describes unused electrical power that collects in your lines, creating spikes in electric readings.

The biggest producer of dirty electricity tends to be our vast array of electronics. This is because in order for electronics to operate, they need to change the current in order to work properly. Dirty electricity can be caused by TVs, fans with multiple speeds, light dimmers, computers, Wi-Fi routers, battery chargers, and much, much more.

Why does this happen? This is because many of the devices you use today don’t use electricity like the technology of 100 years ago. It has to manipulate the normal 50/60 Hz AC electricity found in some electrical lines in order to be used by today’s electronics.

Also, devices may use electricity by doing it in a short burst instead of constant running. What this means is that the flow of the electricity keeps getting interrupting, creating dirty electricity spikes.

So, where does this unused electricity go? It may spread through your house or to other homes. As it does so, it increases EMF radiation. That’s why it’s referred to as dirty electricity. It’s useless, harmful electricity that may have health risks to it.

Why Does This Matter?

Dirty electricity has several problems associated with it, which can affect your health, your electronics, and the environment.

First, let’s talk about the health effects. There’s a lot we don’t know about dirty electricity, but the evidence we do have doesn’t seem to be good. Dirty electricity can emit radiation that can disturb our biological systems.

Dirty electricity, and the EMF radiation it generates, could be to blame for insomnia, pain, immune system issues, some serious health concerns like diabetes and cancer, and more. Obviously, there’s a lot of science we still don’t know about this, and dirty electricity may not be a singular cause. However, if it contributes at least a little bit to negative health, this may be an issue you want to tackle if you want to live a healthy life.

Also, dirty electricity may be having an impact on your electronics. All that spare electricity may end up damaging your electronics after long periods of use, which means you may end up spending more because your electronics aren’t lasting as long.

How to Detect Dirty Electricity

Chances are, your home has some dirty electricity. However, you may not know how you’re supposed to detect it. That’s why we’re here to help.

First, do you have any devices that convert AC electricity into DC? That is the main cause of dirty electricity. There’s a good chance you probably have some devices in your house that emit it. Above, we gave a few examples of devices that could, which are quite a few modern conveniences.

Smart meters are another cause of dirty electricity. One reason for this is because they connect to every circuit in the home. As you probably know if you know anything about EMF radiation, smart meters are a bit of an enemy, creating pollution every way they go.
In fact, many smart appliances have this issue as well. Your TV, your phone, even your kitchen appliances may have smart capabilities to it. The best solution is tossing away your electronics, but let’s face it: most people won’t want to do that.

So, how do you detect it? The Graham-Stetzer Microsurge Meter is a reliable, and easy way to do so. In order to use it, you simply plug it into a circuit, and you get a reading. If a room has one circuit, you’ll need to test each room’s circuit. If there are multiple rooms on just one circuit, you only need to test one. And finally, if a room has multiple circuits, you must test each of them. Bigger rooms tend to have more than one circuit.

>> Check prices on Amazon 

With this meter, it should have a reading of under 50. Over 50 means that there may be an appliance or another device plugged in. Should the reading be over 50, unplug the device and try reading it again. Should the number go down, then you will realize that the smart device is to blame.

So, what happens if you unplug the devices but the reading doesn’t go down? It may be an issue with the circuit itself.
One solution for this is to get a filter. This can help to reduce radiation and dirty electricity. It may work for you. Should it not, then you may have a wiring problem with it. For example, it could be a poor grounding. You may need to consult an electrician and see if there are any issues with it.

Should you call an electrician, you want to make sure to have a meter and filter handy and keep testing until the problem is resolved. Having a filter already in place as they are looking for an issue may help out.

We should also mention that electrical issues are more prevalent in homes that are older. Should your home be older, you may want to consult an electrician. While it is always a hassle to call, schedule, and pay for an electrician, you should do this if you want to preserve your health.

If You Love Your Devices, Use Filters

With all that said, the best solution to reduce dirty electricity is to stop using smart devices that can create that. However, that’s a bit like saying that if you want to reduce your risk of being in a car crash, don’t go in a car. Smart devices have made our lives easier (and more complex in some areas,) and some of us couldn’t live without them. You may be reading this on a smart device!

That’s why it’s important to buy filters, such as Stetzerizer Filter, and use them whenever you plug them in. This can make your life a lot easier.

>> Check prices on Amazon 

Final Thoughts on Dirty Electricity

The way modern electronics work can create unused electricity, known as dirty electricity, which can spread through your home. Dirty electricity is not the only pollution, but it can contribute to several health issues. While there is a lot we still don’t know about it, we know it can lead to immune, sleep, and other health issues.

The best way to test your home is through a Graham-Stetzer meter. Should your reading be above 50, you may want to unplug your devices and test again.

If it’s still above that, a Graham-Stetzer filter may work. If you’re still having issues, you may want to speak to an electrician.

Dirty electricity is an issue that luckily, more people are being mindful of. Perhaps one day, we’ll have appliances and devices that won’t create it, or all homes will come equipped with a filter that will eliminate any unused electricity. Until then, it’s important to test for it and make sure that it’s not invading your home.